Big Sals

Custom DTF A4, A3, 50×100cm

£4.00 GBP

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size A4 DTF Sheet A3 DTF Sheet 57x100cm DTF Gang Sheet

Quantity

Build Your Gang Sheet

Custom DTF Gang Sheet Transfers — A4, A3, 57×100cm

Professional-quality DTF transfers designed for makers, printers, and small businesses. Use the gang sheet builder to upload and arrange multiple designs onto a single sheet — maximise space, reduce waste, and save money.

This is a physical printed product. You will receive ready-to-press DTF transfers. No garments included.

▼ Tap any section below to expand for more information

📏 Available Sheet Sizes

Size	Best For
A4	Smaller designs, samples, testing
A3	Medium runs, multiple small designs
57×100cm	Bulk production, maximum value per sheet

All sizes use the same high-quality DTF process for consistent results.

🛒 How to Order

Select your sheet size from the options above
Use the gang sheet builder tool to upload and arrange your designs
Place your order — artwork is printed exactly as uploaded
Your ready-to-press transfers are produced and dispatched within 1–3 working days

Please ensure your files are print-ready before submission.

🖌️ Artwork Guide

Accepted formats: PNG, PDF, SVG, JPG
Minimum 300 dpi for best print quality
RGB colour mode preferred
Transparent backgrounds recommended for clean cut lines
Artwork is printed exactly as supplied — ensure files are print-ready before upload
Colours may vary slightly depending on screen calibration

🔥 DTF Pressing Instructions

Standard industry DTF pressing guide. Always test on a spare garment first.

Setting	Value
Temperature	160–165°C (320–330°F)
Pressure	Medium-firm
Press time	15–20 seconds
Peel	Warm or cold peel (see film backing)
Re-press (optional)	5–10 seconds with parchment paper for added durability

Pre-press the garment for 3–5 seconds to remove moisture and wrinkles
Place transfer print-side down on the garment
Apply firm, even pressure across the full transfer area
Peel slowly and evenly — if the transfer lifts, re-press for a few more seconds
Works on cotton, polyester, poly-cotton blends, and most natural fibres
Not recommended for nylon, waterproof fabrics, or heavily textured surfaces without testing

✂️ Garment Care Instructions (After Pressing)

Wait at least 24 hours after pressing before washing
Machine wash inside out at 30–40°C on a gentle cycle
Use a mild detergent — avoid fabric softener directly on the print
Do not tumble dry on high heat — low heat or air dry recommended
Do not iron directly over the printed area
Do not dry clean
Do not bleach
Turning garments inside out for every wash helps preserve print quality long-term